MZG WNMG 080412 080408 HQ-ZN60 MS MA MQ Stainless Steel Processing CNC Tools Cement Carbide Inserts for WWLN MWLN Turning Tool

1.MZG Tungsten Carbide Inserts Item Specifics

MZG Tungsten Carbide Inserts Specification Parameter

Specification           Material       Corner-R                   ApplicationWNMG060404                 ZP1521               R0.4               Stainless Steel Processing

WNMG060408                 ZP1521               R0.8               Stainless Steel Processing

WNMG080404                 ZP1521               R0.4               Stainless Steel Processing

WNMG080408                 ZP1521               R0.8               Stainless Steel Processing

3.MZG Tungsten Carbide Inserts Packing Info

Insert Packing Info

4.MZG Tungsten Carbide Inserts Parameter

MZG CNC Tool Insert Material Introduce

1. Applicable from low to high speed cutting and from finishing to roughin.

2. Stable cutting is achieved due to the superior toughness and crack resistance.

3. Cutting times are reduced due to good chip control from effective chipbreakers.

1. Good for low to high speeds and finishing to heavy roughing cutting.

2. Stable cutting with excellent toughness.

3. Smooth fine surface of PVD coated carbide provides good surface finish and high.

1. Excellent wear resistance enables high cutting speeds

2. Cermet maintains good surface finished due to the low affinity to workpiece material.

3. Excellent wear resistance enables high cutting speeds.

1. Tough and Hard, good thermal conductivity

2. Suitable for cutting non-ferrous metals and non-metals

3. Stable cutting at low cutting speeds, including milling operations

1. Superior wear resistance when cutting hard materials

2. Suitable for high speed cutting of cast iron and sintered steel

3. High thermal conductivity provide stable cutting

1. Applicable for non-ferrous metals, non-metals turning milling and other various type of cutting .

2. Reduced edge build-up allows for high precision cutting.

3. Diversified applications for cutting of non-ferrous metals and non-metals.

4. Finished surface will be rainbow colored.(a mirror-like finished surface will not be obtained when single crystal diamond is used.)